Gallery  |  New Parts
Cart 0 item(s): $0.00
Cab Parts, Glass
Clutch, Trans, Diff, Rear Axle, PTO
Cooling Systems
Engine Parts
Filters
Front Axle, Steering
Gauges
Gifts
Hoods, Grilles, & Decals
Ignition & Electrical
Implement
Paint
PTO, Drawbar, & Hitch
Pumps: Hydraulic & Steering
Rims, Wheels, & Fenders
Seats
Videos & Books
Hood With Large Exhaust Hole For Allis Chalmers: B, C, CA. Replaces Allis Chalmers PN#: 70225260, 225260. Made With 18 Gauge Steel.
Hood With Large Exhaust Hole For Allis Chalmers: B, C, CA.
Model(s): B, C, CA 		Fits various models Stays flexible, will never crack or peel off. This is resistant to gasoline, diesel fuel, alcohol and other fuel additives. This has a bright color so you can see the results clearly. It covers rust, seals old rust in and prevents future rusting. This seals leaks and gets the multitude of pin holes you cannot find. We sell this in a 1 quart can. Each one quart can seals one 12 gallon tank. If your tank is 24 gallons you will need two quarts. Please note this product cannot be sold in California. If you are interested in this and are located in California, please contact us. We can special order a low V.O.C. acetone formula for California only.
Fuel Tank Liner
Model(s): 		10" 6 Spring Reman Pressure Plate For Allis Chalmers: WC, WD, WD45, WF, WD45. Up to SN#:99648 Allis Chalmers PN#70230506, 70216791. Flywheel Step Specs:1.188"
10" Reman Pressure Plate For Allis Chalmers: WC, WD, WD45, WF.
Model(s): WD, WD45 		Fan, and Generator Belt For Allis Chalmers: Diesel Engine Models: 4W305, WD, WD45, 8550. Allis Chalmers PN#: 70226935
Fan, And Generator Belt For Allis Chalmers: Diesel Engine Models: 4W305, WD, WD45, 8550
Model(s): 8550, WD, WD45
Price: $478.35 each Price: $126.10 each Price: $193.74 each Price: $25.94 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits various models Fits the same applications as STP part number ABC418 alternator 0.670" shaft diameter Round hole, not keyed 3-3/16" pulley O.D. 1/2" belt width
1/2" Alternator Pulley
Model(s): 		Fits: G ('some' with N62 Continental)
0.060" Undersize (1.440") Connecting Rod Bearing
Model(s): 		Top Vented Gas Cap With Gasket For Allis Chalmers: A, B Up to SN#: 101, D17 Early Models, M SN#: 831 and Up, U, UC, WC Unstyled Up to SN#: 2045, WF Unstyled. Replaces Allis Chalmers PN#: 206622, 70206622. Cap Says Buy Clean Fuel and Keep it Clean.
Top Vented Gas Cap With Gasket For Allis Chalmers: A, B, M, U, UC, WC, WF.
Model(s): B, D17, WC 		Chrome Exhaust Stack For Allis Chalmers: B, C, CA, D10, D14, D15 Up to SN#: 9001, IB, RC All Listed Models With Thru Hood Mufflers. 3" O.D., 24" Body, 5" Base, 29" Overall Length.
Chrome Exhaust Stack Allis Chalmers: B, C, CA, D10, D12, D14, D15, IB, RC
Model(s): B, C, CA, D10, D12, D14, D15, IB
Price: $38.50 each Price: $68.36 each Price: $24.90 each Price: $221.92 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits: 190 (Early up to SN: 20599); Replaces: 243569, 70243569 This tachometer is designed for the early 190 with the tachometer driven off of the camshaft. ***This tachometer measures 3.340" housing outside diameter and 2.050" long.***
Allis Chalmers Early 190 Tachometer / Operation Meter
Model(s): 		AC Miscellaneous - Fits: Cotton Picker: 616, 622, 801, 802 Allis Chalmers - Fits: D21 (For High Beam ); Replaces: 70239803 4.5" Dia 1-1/8" Stud length Includes high beam bulb
12-V Sealed Beam Light
Model(s): 		Fits: [ D10, D12 (Hydraulic lever knob) ], D17 (Snap coupler release lever knob), D21 (PTO and throttle knob), [ WC, WD, WF (PTO and belt pulley lever knob) ], WD45 (Gas & Diesel PTO and belt pulley lever knob), [ 170, 175, 4W220, 4W305, 7000, 7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070 (Pump control knob) ], 185 (SN: 12800
Bakelite Knob
Model(s):
Steering Wheel Spinner For Allis Chalmers Tractors.
Model(s):
Price: $187.68 each Price: $85.10 each Price: $19.10 each Price: $32.86 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits: [ D10, D12, D14, D15, I40, I400, I60 (Gas/LP) ], Backhoe: I600 (Gas/LP), Crawler: H3 (Gas/LP); Replaces: 227627, 239791, 70227627, 70239791 Engines - G138, G149, G160
Cast Rocker Arm Support Stand
Model(s): 		Light Switch Knob For Allis Chalmers: B, C, CA, G, RC, WC, WD, WD45, WF.
Light Switch Knob For Allis Chalmers: B, C, CA, G, RC, WC, WD, WD45, WF.
Model(s): B, C, CA, G, WC, WD, WD45 		Fits: [ 160, 6040 (both with 3-152 C.I. Perkins indirect injection diesel engine) ]; Replaces: 2080178, 2080180, 2080181, 72080178, 72080180, 72080181
Oil Pan Gasket
Model(s): 		Gauge set Allis Chalmers Tractors WD45 Diesel, D15 Deisel, D17 Deisel, D19 1) Oil Pressure Gauge 2) Water Temperature Gauge 3) Fuel Gauge 4) Ampere Gauge
Gauge Kit Allis Chalmers WD45 Diesel, D15 Diesel, D17 Diesel, D19
Model(s):
Price: $52.89 each Price: $19.10 each Price: $36.34 each Price: $94.40 each
Add to Cart Add to Cart Add to Cart Add to Cart
Precleaner Cap Assembly For Allis Chalmers: D15 Up to SN#: 9000. Replaces Allis Chalmers PN#: 4016565, 74016565, 722841. 2" I.D. Base, 5-1/2" O.D.
Precleaner Cap Assembly For Allis Chalmers: D15.
Model(s): D15 		Fits: B ((Correct For Early B)Like original with fender mounted on the inside of the angle bracket and the bracket on the outside. (Serviceable For Late B)), [ C, CA (Serviceable) ]; Replaces: 225236, 70225236 This fender is more rounded than the original fenders on B, C, and CA --- Also on late applications, you will have to grind off the brackets. -- Same gauge, weight and material as original equipment--FIT TO TRACTOR BEFORE PAINTING--This fender is primer painted, color may vary, it will need to be sanded & filler primer to fill in any spots from spot welding.
Fender (Rh)
Model(s): 		Fits: A, [ D10, D12, D14, D15, D17, D19, I40, I400, I60 (Using Mechanical Gauge) ], Backhoe: I600 (Using Mechanical Gauge) BRASS---FOR GAUGES WITHOUT REMOVABLE FITTING --- 1/8" PIPE TO 1/4" COMPRESSION
Oil Gauge Fitting
Model(s): 		Fits: D10, D12, D14, D15 (up to sn 9001), G; Replaces: 230874, 800412, 70230874, 70277309, 70800412 SET INCLUDES: 2 LININGS W/ RIVETS --- 1 SET FOR 1 WHEEL ONLY --- 1-3/4" WIDE X 8-1/8" LENGTH -- .190" THICK **NO RETURNS IF SHOE IS CRACKED/BROKEN FROM TRYING TO INSTALL ***THESE ARE VERY FRAGILE!
Brake Shoe Lining Set For 1 Wheel
Model(s):
Price: $164.10 each Price: $198.97 each Price: $26.98 each Price: $61.17 each
Add to Cart Add to Cart Add to Cart Add to Cart

Allis-Chalmers Parts is your source for:
    parts.

Call to Order: 866-235-1979
Credit Card Badges
Contact Us | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.