Gallery  |  New Parts
Cart 0 item(s): $0.00
Cab Parts, Glass
Clutch, Trans, Diff, Rear Axle, PTO
Cooling Systems
Engine Parts
Filters
Front Axle, Steering
Gauges
Gifts
Hoods, Grilles, & Decals
Ignition & Electrical
Implement
Paint
PTO, Drawbar, & Hitch
Pumps: Hydraulic & Steering
Rims, Wheels, & Fenders
Seats
Videos & Books
We have assembled this kit to include the items that we commonly use when winterizing a tractor. We have winterized many tractors over the years and these are the best products that we have found for the job. 1. 6 or 12 volt Float charger- the float charger will keep your battery charged during the winter. Charger automaticlly detects 6 or 12 volts. - After reaching peak 14.4 VDC, charge automatically switches to 13.2 float voltage - When voltage drops below 12.6 VDC, charging resumes at 14.4 VDC - Two color LED indicates state of charge - Reverse polarity protected and spark proof - 12volt output cord 2. Fuel stabilizer- We use Sta-bil brand fuel stabilizer which prevents gas from turning to turpentine. 3. Tire shine, will protect those expensive to replace tires. 4. Wax For your paint 5. Anti freeze tester. You don't want your block to freeze and crack.
Winterization Kit - Includes Float Charger/ Battery Tender
Model(s): 210220, 7000, 7010, 7020, 7030, 7040, 7045, 705... 		AC Combines - Fits: [ Combine: E, EIII (with 226 cubic inch Gas engine) ] AC Miscellaneous - Fits: Cotton Picker: 616 (with 226 cubic inch Gas engine), [ Loader: TL10, TL11, TL12 (Gas/LP with 201 or 226 cubic inch engines) ], [ Motor Grader: D, DG, M65 (Gas/LP with 201 or 226 cubic inch engines) ], Power Unit: W201, W226, W25, Speed Patrol: W (Gas/LP with 201 or 226 cubic inch engines) Allis Chalmers - Fits: [ D17, WC, WD, WD45, WF, 170, 175 (Gas/LP with 201 or 226 cubic inch engines) ]; Replaces: 255297, 70255297
Valve Cover Gasket
Model(s): 		Allis-Chalmers D17 Diesel ONLY This Gauge Set Consists of the following Gauges: Tachometer Counter Clock Wise, Oil Pressure Gauge , Water Temperature Gauge , Fuel Gauge, Ampere Gauge
Allis Chalmers D17 Diesel Only: Tachometer, Temp, Oil Pressure, Fuel, Amp Gauge Set
Model(s): 		Metal Pre Cleaner Base For Allis Chalmers: D17 Diesel.
Metal Pre Cleaner Base For Allis Chalmers: D17 Diesel.
Model(s): D17
Price: $88.56 each Price: $41.08 each Price: $94.10 each Price: $129.27 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits: RC; Replaces: TPL72 This reprint manual has 46 pages and is 8-1/2" x 11".
Parts And Operators Manual Reprint: Allis Chalmers RC
Model(s): 		Air Cleaner Hose Clamp For Allis Chalmers: G. Replaces Allis Chalmers PN#: 911290. 1-5/8" O.D. Hose.
Air Cleaner Hose Clamp For Allis Chalmers: G.
Model(s): G 		Worm Drive Hose Clamps 1-1/2" to 2-1/2" range 1/2" band width Fits hose size 1-1/2" to 1-7/8" Premium stainless steel 5/16" hex head screw and band Priced and sold in boxes of 10
Worm Drive Hose Clamps 1.5-2.5 inch
Model(s): 		Allis Chalmers Original manual, not a reproduction. Approximatley 50 pages of rare information on Grain Headers Models Flex and rigid Effective Serial Numbers 33001-37000.
Operator's Manual - Allis-Chalmers Grain Headers Flex & Rigid used
Model(s):
Price: $37.06 each Price: $9.27 each Price: $31.91 each Price: $19.95 each
Add to Cart Add to Cart Add to Cart Add to Cart
Intake and Exhaust Manifold Gasket Set For Allis Chalmers D17 Gas, WC Gas, WD Gas & LP, WD45 Gas
Intake And Exhaust Manifold Gasket Set For Allis Chalmers D17 Gas, WC Gas, WD Gas & LP, WD45 Gas & LP, 170, 175
Model(s): D17, WC, WD, WD45 		Front Nose Emblem For Allis Chalmers: D10, D12 Up to SN#: 1950, D14 Upt to SN#: 19000, D17 Up to SN#: 24000, I40, I400, I60. Replaces Allis Chalmers PN#: 70228474, 228474.
Front Nose Emblem For Allis Chalmers: D10, D12, D14, D17, I40, I400, I60.
Model(s): D10, D12, D14, D17 		Fits: [ B, C, CA, D14, D17, U, WC, WD, WF (Auxiliary Gas Tank Cap Gasket) ], G (Engine Oil Cap Gasket for G), WD45 (Auxiliary Gas Tank Cap Gasket & Power Steering Cap Gasket); Replaces: 202963, 70202963, U2963
Filler Cap Gasket
Model(s): B, C, CA, D14, D17, G, WD, WF 		Fits: [ B, IB (SN: 101 and up) ] Fits ROSS steering box only. 0.919" overall length Fits 0.375" hole The old pin must be machined out.
Steering Levershaft Pin: AC B
Model(s):
Price: $31.67 each Price: $45.03 each Price: $16.46 each Price: $42.97 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits: B, C, CA, [ D10, D12, D15 (Up to SN: 9001) ], D14, D17 (Up to SN: 42001), G, WD, WD45
Base Gasket For Bullet Tail Light
Model(s): 		Radiator Cap For Allis Chalmers: WC, WF Unstyled Tractors. Replaces Allis Chalmers PN#: 206622, 70206622.
Radiator Cap For Allis Chalmers: WC, WF Unstyled Tractors.
Model(s): WC, WF 		A, AN, ANH, AW, AWH (All sn 460000 and up; G), GH (All sn 47996 and up; 60), GM, GN, GW, 620, 70, 720; Replaces: A1910R LENGTH = 1.725", OD = 1.002", ID = 0.940"
Steering Wheel Shaft Bushing
Model(s): 		Fits: D17 (Up to SN: 42000), D19 (Used as a hydraulic oil control spring on D19 up to SN: 12850. Not used for brakes on D19.), WD, WD45; Replaces: 222500, 232564, 70222500, 70232564 3.135" overall length; 0.595" O.D.; 0.081" wire diameter. 2 used per tractor. Sold individually.
Front Brake Shoe Return Spring
Model(s):
Price: $12.98 each Price: $24.75 each Price: $43.44 each Price: $19.81 each
Add to Cart Add to Cart Add to Cart Add to Cart
15" 3 Spoke Steering Wheel For Allis Chalmers: 6060, 6070, 6080, 7000, 7010, 7020, 7045, 7060, 7580, 8010, 8030, 8050, 8070, 8550. Replaces Allis Chalmers PN#: 71142487, 1142487. 36 Spline 0.853" O.D., 13/16" Hub.
15" 3 Spoke Steering Wheel For Allis Chalmers: 6060, 6070, 6080, 7000, 7010, 7020, 7045, 7060, 7580, 8010, 8030, 8050, 8070, 8550.
Model(s): 7000, 7010, 7020, 7045, 7060, 7580, 8010, 8030,... 		Pressurized Radiator For Allis Chalmers: B, C, CA, D10 Up to SN#: 3501, D12 Up to SN#: 3001, IB. Replaces Allis Chalmers PN#: 70232113, 70214337, 232113, 214337.
Pressurized Radiator For Allis Chalmers: B, C, CA, D10, D12, IB
Model(s): B, C, CA, D10, D12, IB 		AC Combines - Fits: used as an engine oil pump pressure regulating spring, 1 used per engine: 60, 60A, 60H, 66 AC Miscellaneous - Fits: [ used as an engine oil pump pressure regulating spring, 1 used per engine: B116, B125, B15, G160 (all Power Units) ], TL6 (loader) Allis Chalmers - Fits: [ used as a hydraulic pump pressure regulating ball valve spring: D10, D12, D15, D17, D19, I60, I600 (4 used) ], D14 (3 used), [ WD, WD45 (5 used) ], WD45 (diesel, 5 used), [ used as an engine oil pump pressure regulating spring, 1 used per engine: 500, 510, 512, 514, 521, 600, 610, 612, 614, 615, 621, 630 (all forklifts) ], B, C, CA, D15 (SN: 9001 and up), D272, H3 (SN: 6001 and up), I60, I600, IB, RC; Replaces: 207839, 70207839 1.140" free length 0.270" to 0.350" O.D., tapered 1 used per engine.
Pressure Regulating Spring
Model(s): B, C, CA, D15 		Customer must stamp the numbers. This starter tag is black anodized aluminum. This starter tag measures 2.955" O/A length, 0.915" Wide with 0.140" rivet holes. The measurement from the center to center of the rivet holes is 2.650".
Blank Starter Tag For Autolite (2 Rivets Included)
Model(s):
Price: $109.10 each Price: $484.09 each Price: $7.69 each Price: $33.98 each
Add to Cart Add to Cart Add to Cart Add to Cart

Allis-Chalmers Parts is your source for:
    parts.

Call to Order: 866-235-1979
Credit Card Badges
Contact Us | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2025 Pacific Supply Group.