Gallery  |  New Parts
Cart 0 item(s): $0.00
Cab Parts, Glass
Clutch, Trans, Diff, Rear Axle, PTO
Cooling Systems
Engine Parts
Filters
Front Axle, Steering
Gauges
Gifts
Hoods, Grilles, & Decals
Ignition & Electrical
Implement
Paint
PTO, Drawbar, & Hitch
Pumps: Hydraulic & Steering
Rims, Wheels, & Fenders
Seats
Videos & Books
Reman 11", 4 Pad Disc Clutch Kit For Allis Chalmers: 170, 175. Kit Includes Disc, Pressure Plate, Release Bearing, and Pilot Bearing. Replaces Allis Chalmers PN#: 70241253.
Reman 11" Clutch Kit For Allis Chalmers: 170, 175.
Model(s): 170, 175 		For years of protection against Oxidation, Weathering, Stains, UV Rays, Corrosion, Salt Spray and Electrolysis. Makes re-cleaning a snap. Will work on most metal surfaces. Rejuvenates and restores faded or oxidized surfaces to "like new" condition. Clear-Coat is easily applied using a cotton cloth or brush. Clear-Coat will not CHIP, CRACK OR PEEL. The surface must be clean and dry. ***CAN'T SHIP TO CA OR ABROAD***
Clear Coat - Gloss Acrylic Lacquer Paint -Quart pricing
Model(s): 		Universal 12 Volt Resistor For Allis Chalmers Tractors. Replaces Allis Chalmers PN#: 241266, 70241266.
Universal 12 Volt Resistor For Allis Chalmers Tractors.
Model(s): 		Intake and Exhaust Manifold For Allis Chalmers D10, D12, I40, I400. 17-3/8" Center to Center Outer Stud Holes. 2-1/4" Center to Center Carb Mounting Base. 1" Carb Venturi Hole. Replaces Allis Chalmers PN#: 70233235, 233235
Intake And Exhaust Manifold For Allis Chalmers D10, D12, I40, I400
Model(s): D10, D12
Price: $342.68 each Price: $85.39 each Price: $18.10 each Price: $442.90 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits: WC, WD, WD45, WF, WI, WS Approx. 76 minutes running time.
Allis-Chalmers Engine Rebuild Video (Dvd)
Model(s): 		Fits: WC, WD, WF Carb Mfg #'s - : TSX159, TSX422 ***Make sure to find your carb manufacturer number in the list above, If your number is not in this list, this kit is not the correct kit for your application.*** This kit includes throttle shaft, needle and seat, float lever pin, choke and throttle shaft seal, needle valve, adjustment screw, gaskets, and instructions.
Basic Marvel Schebler Carburetor Repair Kit
Model(s): 		Fits: [ B, C, IB ('some' early models with 9" diameter (not 8 1/2") clutch assembly) ], CA ('some' Sn: 3149 thru 34399, with 9" diameter (not 8 1/2") clutch assembly), D10 (up to SN: 3501; 'some' early models with 9" diameter standard (not H.D.) clutch assembly), D12 (up to SN: 3001; 'some' early models with 9" diameter standard (not H.D.) clutch assembly), [ D14, D15, H3, HD3, I500, I600 ('some' early models with 9" diameter standard (not H.D.) clutch assembly) ]; Replaces: 206968, 70206968, 70207784, 70208626, 70216965, 70227704, 70228926, 70230099, 70231976, 70232239, 70235075, 70235079, 70236105, 70236120, 70236122, 70247743, 70247744, 70247745 Includes new 9" woven clutch disc w/ 1 1/8"-10 splined hub 9" pressure plate Throwout bearing Pilot bearing Clutch lineup tool. 2 Different sizes were used for these models (8 1/2" or 9" diameter), Must measure old one BEFORE ordering a kit Please note this does not include a pilot bushing. Pressure plate mounting holes spaced in groups of 2. Will not fit late tractors using Rockford TT-9 pressure with mounting holes spaced evenly.
New Clutch Kit
Model(s): 		Intake and Exhaust Manifold For Allis Chalmers D17 Gas Up to SN#: 32000, WC Gas, WD Gas & LP, WD45 Gas
Intake And Exhaust Manifold For Allis Chalmers D17 Gas, WC Gas, WD Gas & LP, WD45 Gas & LP
Model(s): D17, WC, WD, WD45
Price: $64.70 each Price: $96.73 each Price: $316.64 each Price: $267.77 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits: B ((Correct For Early B)Like original with fender mounted on the inside of the angle bracket and the bracket on the outside. (Serviceable For Late B)), [ C, CA (Serviceable) ]; Replaces: 225236, 70225236 This fender is more rounded than the original fenders on B, C, and CA --- Also on late applications, you will have to grind off the brackets. -- Same gauge, weight and material as original equipment--FIT TO TRACTOR BEFORE PAINTING--This fender is primer painted, color may vary, it will need to be sanded & filler primer to fill in any spots from spot welding.
Fender (Rh)
Model(s): 		4.00X12 Triple Rib Front Tire For Allis Chalmers: G Not Designed For Tubeless Tire Applications.
4.00X12 Triple Rib Front Tire For Allis Chalmers: G
Model(s): G 		Ignition Switch With Keys For Allis Chalmers: B, C, CA, D14, WD, WD45. Replaces Allis Chalmers PN#: 225310, 70225310.
Ignition Switch With Keys For Allis Chalmers: B, C, CA, D14, WD, WD45.
Model(s): B, C, CA, D14, WD, WD45 		Fits: [ B, C, IB (modification required) ] 8" X 24" --- 4 LOOPS --- 14" C-C LOOPS (side by side) 20" Center to Center (across the center) --- Uses 5/8" Bolts, Depending on application ORIGINAL bolts may not work----VALVE STEM HOLE IS ON LOOP SIDE CLOSEST TO EDGE OF RIM--- TO DETERMINE THE WIDTH OF THE RIM, MEASURE THE INSIDE (BEAD TO BEAD) NOT OUTSIDE TO OUTSIDE -- NOT DESIGNED FOR TUBELESS APPLICATIONS Please check and measure your tractor closely because if this rim does not fit, we do not pay return shipping on rims.
Rear Rim 8 X 24
Model(s):
Price: $198.97 each Price: $129.90 each Price: $23.90 each Price: $426.55 each
Add to Cart Add to Cart Add to Cart Add to Cart
Decal Set For Allis Chalmers: WD45. Black Lettering.
Decal Set For Allis Chalmers: WD45.
Model(s): WD45 		Fits: G (with N62 Continental engine) 0.010" undersize (1.990") main journal size. Priced and sold as set for engine. Measure before ordering, no returns if package has been opened.
Main Bearing Set, 1.990" (0.010" Undersize), With Thrust Washers
Model(s): 		Fan Belt For Allis Chalmers: "B, C, CA, D14, IB With Generator" "D10 Up to SN#: 3501, D12 Up to SN#: 3001, With Generator" Replaces Allis Chalmers PN#: 209656, 70209656.
Fan Belt For Allis Chalmers: "B, C, CA, D14, IB With Generator" "D10, D12, With Generator"
Model(s): B, C, CA, D10, D12, D14, IB 		9" 6 Spring Reman Clutch Pressure Plate For Allis Chalmers B, C, CA, D10, D12, D14, D15 Tractors With 6 Evenly Spaced Mounting Holes. The Allis Chalmers B, C, CA Series Tractors were also Manufactured with a 8-1/2" Clutch Please Check Size Before Ordering. There is a additional $20.00 Refundable Core Charge.
9" 6 Spring Reman Clutch Pressure Plate For Allis Chalmers B, C, CA, D10, D12, D14, D15.
Model(s): B, C, CA, D10, D12, D14, D15
Price: $64.76 each Price: $204.35 each Price: $27.50 each Price: $144.10 each
Add to Cart Add to Cart Add to Cart Add to Cart
Fits: RC (BLUE) Please note that the 'RC' letters are not included with this decal kit. Allis Chalmers never included an 'RC' decal on the tractor when they were originally built. The 'RC' letters are available by special order only. Allis did not use model symbol decals before 1951. The model symbol decal drawings were made in June 1951, and included the B, CA, and WD. The decals had a clear background, black letters.***Caution: Inspect all decal pieces before applying to the tractor. We cannot offer a refund on mylar decals if they have been applied and/or if they are damaged. Store these tractor decals in a cool, dry place. Do not soak these mylar tractor decals in water. ***
AC RC Blue: Mylar Decal Set
Model(s): 		Air Cleaner To Carburetor Hose For Allis Chalmers: WD45 Gas Tractors. Replaces Allis Chalmers PN#: 226266, 70226266. 1-7/8" I.D., 6-3/8" Length Inside Curve, 8-7/16" Outside Curve Length.
Air Cleaner To Carburetor Hose For Allis Chalmers: WD45 Gas Tractors.
Model(s): WD45 		Hydraulic And Transmission Oil Cap & Dipstick Assembly For Allis Chalmers: CA, D10, D12, D14, WD. Replaces Allis Chalmers PN#: 224611, 70224611
Hydraulic And Transmission Oil Dipstick/Cap For Allis Chalmers: Allis Chalmers - Fits: CA, D10, D12, D14, WD.
Model(s): 		Fits: [ D10, D12 (Up to SN: 9000 with 4 speed transmission) ]; Replaces: 232176, 232176, 232176, 232177, 232177, 232177, 232189, 232189, 232189, 70232176, 70232176, 70232177, 70232177, 70232189, 70232189 Includes AC logo 3.330" housing outside diameter (OD) 1.500" clamp inside diameter (ID)
Tachometer / Operation Meter
Model(s):
Price: $102.64 each Price: $31.72 each Price: $45.84 each Price: $285.26 each
Add to Cart Add to Cart Add to Cart Add to Cart

Allis-Chalmers Parts is your source for:
    parts.

Call to Order: 866-235-1979
Credit Card Badges
Contact Us | Privacy Policy | Legal Notices | Terms & Conditions | Shipping Policy

A division of ©2026 Pacific Supply Group.